English
The HDD: General menu allows you to initialize the hard
drive(s) in the NVR. Don't initialize a drive that already has data
on it, as the initialization process will erase any information
on the drive. You also have the option of adding a Network-
attached storage device (NAS) that you can record to.
Add: Input the IP address of your NAS device and the folder
name that you would like to save to.
Init: Initializes the HDD so that it's ready to accept data.
The HDD: Advanced menu allows you to configure a quota
on the HDD for each camera that is connected to the NVR.
Each camera can be allocated a certain amount of space that
is available on the HDD. If you have multiple HDDs installed,
you can also instruct the NVR on which HDD each camera can
record to.
HDD: General
HDD: Advanced / HDD Detect
The HDD: Detect menu will display technical specifications
of the hard drive(s) installed. If you're looking at this screen,
you've probably been directed to do so by Swann Technical
Support.
55