Rinnai REU-VR3237WG Operation & Installation Manual page 8

IMPORTANT INFORMATION
To clean your water controller(s) use a soft
damp cloth with a mild detergent.
Do Not use solvents!
50°C
Depending on the weather conditions and the
length of the pipe between the hot water unit
and the outlet in use, there may be a variation
between the temperatures displayed at the
water controller(s) and the temperature of the
water at the outlet.
Bathroom
Kitchen
As a safety precaution, if a Kitchen Controller's
temperature is set above 50°C, transferring
and then returning 'priority' to the Kitchen
Controller will result
temperature of 50°C being selected. This is a
safety feature.
Rinnai Australia
49°C
Kitchen
in a default set
4
Max.
43°C
Whilst hot water outlets are open the set
temperature may be lowered. However they
cannot then be raised above 43°C. In addition
transfer of 'priority' between controllers is not
possible. These are safety features.
There is no need to turn the water controller(s)
off after use. However, if you prefer to turn the
water controller(s) off, selected temperatures
to a maximum of 50°C will be stored in the
system memory at all times whilst mains power
remains connected.
Do Not push the On/Off button on any
Controller when the 'Red' water heater 'In Use'
indicator is illuminated as this will turn off the
water heater causing the water to go cold.
Someone maybe in the middle of having a
shower or filling a bath.
Operation Manual