Bissell 1694 SERIES User Manual page 8

To Remove Broken Pump Belt Continued
Remove the Belt Access Door. Insert a flathead
3.
screwdriver into the slot nearest the handle to gently
pry off the door (see illustration).
Turn the machine onto its side so the belt access area is
4.
facing upward (see illustrations).
On the bottom of the machine, near the belt access area, is
5.
a Red Retainer Plate that holds the black Brush Arm and
brush in place. Using a Phillips head screwdriver remove
the screw that holds the Red Retainer Plate in place. Set
Red Retainer Plate and Phillips head screw aside
(see illustrations).
Remove the black Brush Arm that holds the brush in place.
6.
Set the black Brush Arm aside (see illustrations).
Remove the "toothed" brush belt from the brush belt and
7.
brush aside
Locate and remove the broken Pump Belt.
8.
To Install the Replacement Pump Belt
With the unit still on its side, loop one end of the
1.
replacement pump belt around the red pump pulley and
then the other end around the silver motor shaft (see
illustration). Do not twist the replacement pump belt.
Re-install the toothed brush belt first onto the red pump
2.
pulley and then onto the toothed end of the brush
(see Illustration).
Re-install the brush into the base of the unit.
3.
Place the black brush arm onto the brush and slide black
4.
brush arm into base of unit. The black brush arm and brush
should slide easily into original position (see illustration).
Re-install the red retainer plate and Phillips head screw
5.
(see illustration).
Using your finger, gently spin the replacement pump belt on
6.
the silver motor shaft. If assembled correctly, the replacement
pump belt should rotate freely around the silver motor shaft
and drive pulley without obstruction. The brush should also
rotate freely when the silver motor shaft is turned.
Turn the machine right side up and replace the
7.
Tank-in-Tank, and belt access door (see illustration).
Assembly is now complete.
8.
If you have any questions, or are having trouble installing
your replacement pump belt, please call BISSELL Consumer
Services at 1-800-237-7691.
8
3. 4.
5. 6.
7.
8.
1.
2. 3.
4.
5.
6.
7.