Sony DVP-NS700P Operating Instructions Manual page 22

This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use m. If the
amplifier (receiver) has a digital input jack, use @. When connecting to an MD deck or a DAT
deck, use e. In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver).
n
Recommended surround sound effects for the Q) connection only
*TVS STANDARD (page 5 1)
0 In connection a, you can use the supplied audio/video cord instead of using a separate audio cord.
0 To realize better surround sound effects, make sure that your listening position is in between your speakers.
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the connection.
CDKND player
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(red)
to coaxial or optical digital input
to audio input
F4 ) T', amplifier (Fr)
A: Signal flow
22