LevelOne FCS-1081 User Manual page 30

Poe ip camera
Hide thumbs Also See for FCS-1081:
Table of Contents

Advertisement

PPPoE
Use this when you connect the camera through PPPoE (Point -to- Point Protocol over Ethernet). PPPoE
connection is the protocol that is widely used in xDSL (digital affiliate line such as ADSL, VDSL or SDSL)
as the authentication and connection system.
IP Address:The IP address obtained at the PPPoE connecting with network.
User ID:Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64 characters.
Password:Enter the password for authentication necessary for PPPoE connections. Type it up to 32
characters.
Confirm:Re-type the password to confirm.
Obtain DNS server automatically:Select this to obtain the address of DNS server automatically.
Use the following DNS server:Select this when you set the fixed address as the IP address of DNS
server.
Primary DNS:Enter the IP address of the primary DNS server.
Secondary DNS:Enter the IP address of the secondary DNS server.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fcs-1081a

Table of Contents