Apple (Mac) Network Configuration - Night Owl 8 channel digital video recorder User Manual

Chapter 18 Remote Access

18.3 Apple (Mac) Network Configuration

Determine Basic Information about Your Network
Ensure that the DVR is properly connected to the router/modem and that
you have an Apple (Mac) computer connecter to the same router.
Follow the next steps to determine the basic information about your
network.
1. Select the Airport icon on your computer screen.
2. Select the Open Network Preferences option.
3. Select Ethernet (wired).
4. Select the Advanced button in the lower right corner.
5. Select the TCP/IP tab at the top to display your computer's network
information.
6. Make note of your IPv4 Address.
7. Change the last digits to 150. Example, you wrote down the IP
Address 10.1.10.11. When the last digits are changed the IP
address will now be 10.1.10.150.
8. Write this number down on a piece of paper. This IP Address is
what you will use as the IP address of your DVR in the next section.
9. Make note of the IP address listed for Router. This is the IP address
of your router. You will need to enter this in the DVR's network
settings for it to work properly.
68