Denon AVR-S500BT Owner's Manual page 88

Contents Connections
Front Display
Adjust the display brightness of this unit.
o Dimmer
Bright
Normal display brightness.
(Default):
Dim: Reduced display brightness.
Dark: Very low display brightness.
Off: Turns the display off.
0 When the display brightness is set to "Off", the display turns off as in the standby
state.
0 You can also adjust the display by pressing DIMMER on the main unit.
Firmware
When new firmware is supplied, update this unit using the USB port. Use a
USB memory device to update the firmware.
o Update Start
Start the firmware update.
To update the firmware, connect the USB memory device to the USB
port on this unit.
Front panel Display
Playback Settings
Setup Lock
Protect settings from inadvertent changes.
o Lock
On:
Off
(Default):
Perform the following operations to set "Lock" to "Off".
1. Press and hold SETUP for more than 3 seconds.
"Setup Lock:0On1" appears on the display.
2. Use o p to select "Off", then press ENTER.
NOTE
When "Lock" is set to "On", no setting items are displayed except for "Setup
Lock".
Rear panel 88
Tips
Turn protection on.
Turn protection off.
Remote Index
Appendix