Denon AVR-S500BT Owner's Manual page 46

Contents Connections
Listening to FM/AM broadcasts
1
Connect the antenna. ("Connecting an FM/AM
antenna" (v p. 33))
2
Use FM or AM to switch the input source to "FM" or
"AM".
G TV screen H
Tuner
FM 92.1MHz
- +
TUNE Tune
G Display of this unit H
01 FM 92.10MHz
Front panel Display
Playback
AUTO
01
CH+/- Preset OPTION Option
Rear panel
Settings
3
Press MODE to select the tune mode, then press
ENTER.
AUTO
(Default) :
MANUAL:
4
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
0 In "AUTO" mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the "MANUAL" mode to tune in.
0 You can also scan the broadcast station by pressing TUNE + or TUNE - on the
unit.
Operation buttons
MEMORY
MODE
TUNE +, -
CHANNEL +, -
46 Remote
Tips Appendix
Automatically search for and tune to a
receivable radio station.
Manually change the frequency one
step at a time each time the button is
pressed.
Function
Register presets
Switching tune mode
Selects the radio station (up/down)
Selects preset radio stations
Index