Andrew 75E LFL Co-Located Antenna Assembly Instructions Manual page 11

ANTENNA GROUNDING INSTRUCTIONS
1 2
IMPORTANT:
All Antenna Systems must be
properly grounded. Refer to
NEC (National Electric Code)
Article 810 and 820 and local building
codes for specific requirements.
Attach #10 AWG solid copper or #8 AWG
aluminum ground wire to Feed Assembly with
M4 x 16 mm Hex Screw, M4 Lock Washer
and Ring Clip. Tighten to assure a solid
connection. Route Ground wire through
Support Arm and down Mount Tube.
Secure Ground Wire to Mount Tube with
provided Cable Ties. Then attach Ground
Wire to Mount as shown in illustrations with
designated hardware. Tighten securely to
assure quality connection.
NON-PENETRATING ROOF MOUNT
TOOTH
WASHER
GROUND
LUG
M16 x 16 mm
SELF TAPPING SCREW
RING CLIP
#10 AWG
SOLID COPPER
or #8 AWG
ALUMINUM
GROUND
WIRE
TRI-MAST WALL MOUNT
M16 x 16 mm
HEX HEAD SCREW
GROUND LUG
M6 LOCK NUT
GROUND POLE MOUNT
RING
CLIP
10
FEED ASSEMBLY
ROUTE GROUND WIRE
THROUGH SUPPORT ARM
TOOTH
WASHER
TOOTH
WASHER
GROUND
LUG
1/4"
DRILLING SCREW
RING
CLIP
RING
CLIP