Lfe Level; Sp Dly Time (Speaker Delay Time) - Yamaha HTR-5560 Owner's Manual

Hide thumbs Also See for HTR-5560:
Table of Contents

Advertisement

1F MAIN Lv (main level mode)
Change this setting if you cannot match the output level
of the center, rear
(UR).
and rear center speakers with the
main speakers because of unusually high-efficiency
performance from the main speakers.
Choices: Nrm (Normal), -10 dB
Nrm
Select this if you can match the output level of your effect
speakers with that of your main speakers when using the
test tone.
-10 dB
Select this if you cannot match the output level of your
effect speakers with that of your main speakers when
using the test tOile.
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a
Dolby Digital or DTS signal. The LFE signal carries the
low-frequency special effect sound which is only added to
certain scenes.
Control range:
SPEAKER
-20
to
0
dB
HEADPHONE
-20
to
0
dB
Initial setting: 0 dB
D
Press
VIA
to select the item to be adjusted.
~
Press
<
to adjust the LFE level.
"\I
Npte:~
• Adjust the LFE level according to the capacity of your
subwoofer or headphones.
SET MENU
Use this feature to adjust the delay of the center and the
rear center channel sounds. This feature works when there
is sound output from the center speakers. with a source
like Dolby Digital or DTS, etc. Ideally, the center speaker
and the rear center speaker should be the same distance
from the main listening position as the left and right
speakers. However. in most home situations, the center
speaker or the rear center speaker are placed in line with
the main speakers or the rear speakers. By delaying the
sound from the center speaker and the rear center speaker,
the apparent distance from the center speaker and the rear
center sp,,-aker tv the main listening positi0n can be
adjusted to make it seem the same as the distance
between the main left and right speaker, and the rear left
and right speakers to the listening position. Adjusting the
delay time for the center speaker is especially important
for giving depth to the dialogue.
Control range:
CENTER
0 to 5 ms
REAR CNTR (center)
0 to 30 ms
Initial setting:
CENTER
Oms
REAR CNTR (center)
3 ms
Press
<
I
>
to increase or decrease the delay
of the center and the rear center channel
sounds.
Center speaker image
/
\
"
~Ci>~
• Increasing the delay by I ms simulates moving the speakers
about 30 cm (one foot) farther away from the listening
position.
43
0'»
"tic
m<.
:D):Io
~z
_0
om
Zc

Advertisement

Table of Contents
loading

Table of Contents