Table of Contents
Advertisement
TAB 8
TAB 7
C
Y
S
S
HANGING
OUR
YSTEM
Source setup
A setup function will appear in the menu for each
connected device using the name assigned to it during
the initial setup process. For example, you might see
"Cable Setup," "Satellite Setup," or "DVD Setup."
This function is available only after the initial setup is
completed.
This function allows you to:
• Change the name of a connected device
• Set up the remote control
• Remove this device
• Add or change video or audio connections
Add a new device
This function guides you through the process of
connecting a new device to the system. It will help you
to choose the right cable and input, and to program the
Unify™ remote to operate the device.
This function is available only after the initial setup is
completed.
26
TAB 6
TAB 5
ETUP
TAB 4
TAB 3
Update
This function guides you through the process of
updating the software in your system. By using a
computer with an Internet connection, system software
updates from Bose can be downloaded to the USB
drive that is included with your system. Be sure to
carefully follow the instructions displayed on the
VideoWave™ A/V monitor.
Teach mode
This function shows you how to program a third-party
learning remote to control your VideoWave system.
When in this mode, the VideoWave system transmits an
infrared (IR) code for each button pressed on the Unify
remote control. The third-party remote learns how to
control your system by recording these codes. Follow
the instructions displayed on the VideoWave A/V
monitor. To exit this mode, press the Setup button on
the A/V control console.
This function is available only after the initial setup is
completed.
Exit Unify
Closes the Unify menu and returns you to the last
source selected.
TAB 2
English
Advertisement
Table of Contents
