Cleaning Your Scooter - KYMCO People S 250 Owner's Manual

MAINTENANCE
Adding brake fluid:
1. Remove the two Phillips screws retaining the master cylin-
der cap. Remove the cap.
2. Add the specified type of brake fluid to bring the level above
the "MIN" level in the window 4 (
3. Wipe the master cylinder cap and gasket with a clean cloth
and reinstall the cap, tightening the screws securely.
Brake fluid type: DOT 4
Do not mix brake fluid types. Doing so may cause brake
failure and could result in an accident.
Do not allow brake fluid to touch the scooter's body
work, as it will damage the painted surface.
54
).
see image on prior page
Cleaning
Clean your People S scooter regularly to protect the surface
finishes and inspect for damage, wear, and oil, coolant or brake
fluid leakage.
Avoid cleaning products that are not specifically designed for
scooter, motorcycle, or automobile surfaces. Nonspecific clean-
ers may contain harsh detergents or chemical solvents that
could damage the metal, paint, or plastic on your scooter.
NOTE: If your scooter is still warm from recent operation,
give the engine and exhaust system time to cool off be-
fore washing. Avoid the use of high pressure water spray
(typical in coin-operated car washes), as this powerful
spray can damage components on your scooter.
Washing your scooter
1. Rinse the scooter thoroughly with cool water to remove any
loose dirt.
2. Clean the scooter with a sponge or soft cloth using cool water.
Avoid directing water at muffler outlets and electrical parts.
3. Clean the plastic parts using a cloth or sponge dampened with
a solution of mild detergent and water. Rub the soiled area
gently, rinsing it frequently with fresh water. Take care to keep
brake fluid or other chemical solvents away from the scooter,
as they will damage its plastic and painted surfaces.