Cable & Wire Covers; Brake Fluid - KYMCO People S 250 Owner's Manual

MAINTENANCE
Wire & cable cover inspection
The control cables and connection points of the scooter's wire
harness have rubber covers that protect them from dirt and
moisture.
1. The covers 1 should be checked periodically to make sure
they are in good condition .
2. The covers should also be pulled back 2 to make sure
the electrical terminals are not contaminated by moisture,
dirt or corrosion that could affect their electrical integrity.
3. When the cover is pulled back, make sure the connectors
tabs 3 are secured so the connectors will not separate
during operation.
1 1 1 1 1
Use a moist rag to clean debris off of the covers.
2 2 2 2 2
3 3 3 3 3
Corrosion on electrical connectors can alter or dis-
rupt the electrical function of your scooter. Use a
quality, dielectric grease to lubricate and protect elec-
trical connectors.
Always keep the ignition switch OFF when servicing
the electrical connectors. See your KYMCO dealer
for electrical system diagnosis and repair.

Brake fluid

Your scooter is equipped with a hydraulic disc brakes. Check
the brake fluid level window on the master cylinder reservoirs
on the handlebars per the maintenance schedule.
4 4 4 4 4
NOTE: Procedure continued on next page.
53