Connecting The Device To A Pc; Standard Version; Extended Version - Siemens SIMATIC Industrial Flat Panel IFP1500 Operating Instructions Manual

3.3.5

Connecting the device to a PC

3.3.5.1

Standard version

Procedure
1. Connect the Flat Panel and the PC using a DVI or DisplayPort
2. If using a Touch version, also connect the device and the PC
3.3.5.2

Extended version

Procedure
1. Connect the Flat Panel and the PC using
2. If the distance between the Flat Panel
3. If the distance between the Flat Panel
Note
Data transfer per USB transmitter module via USB1.1. The data transmission rate
corresponds to Full Speed according to USB1.1.
Industrial Flat Panel IFP1500, IFP1900, IFP2200
Operating Instructions, 06/2014, A5E31298376-AB
line.
with a USB line.
a DVI or DisplayPort line by means of the
respective interface.
and the PC is less than 5 m, connect the
Flat Panel and PC using the USB Type B
interface.
and the PC is less than 5 m, connect the
Flat Panel and PC with USB transmitter
module by means of the USB-Link
interface.
Installing and connecting the device
3.3 Connecting the device
45