Monitor Images On A Mobile Terminal - Panasonic WV-SW390 Series Operating Instructions Manual

•
Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting
"Low" for "Image quality setting" of "JPEG" (®page 76) may sometimes solve this problem.
•
Depending on the cellular phone in use or its contract plan, it may be impossible to access.
*1 IP address is the global WAN IP address of the router that can be accessed via the Internet.
*2 Only displayed for users whose access level is "1. Administrator" or "2. Camera control" when "On" is selected for "User auth.".
(®page 150)

2.2 Monitor images on a mobile terminal

It is possible to connect to the camera using a mobile terminal and monitor images (MJPEG only) from the
camera on the screen of the mobile terminal. Images are automatically refreshed to display the latest image.
Operations such as pan/tilt/zoom can also be performed.
The compatible mobile terminals are shown as follows. (As of August, 2011)
iPad, iPhone, iPod touch (iOS 4.2.1 or later)
IMPORTANT
•
When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user "admin". (®page 150)
Note
•
To view the camera images from a mobile terminal, network settings needed in order to connect to the
Internet must be set in advance. (®page 160)
2 Monitor images on a cellular phone/mobile terminal
Operating Instructions 21