Advertisement
6
Press NAME EDIT/SELECT repeatedly
to select the character type as follows:
To select
Display
Capital letters and symbols*
Selected AB
Small letters and symbols*
Selected ab
Numbers
Selected 12
* You can use the following symbols in titles:
'-/,.():!?&+<>
-=";#$%'o*-
To enter a space, press 10/O.
7 Press a letter/number/symbol
button to
enter a character.
To enter a number, press the number button
you want.
To enter a letter or symbol,
1
Press the corresponding letter button
repeatedly until the letter or symbol you
want flashes. You can also enter a letter
or symbol by pressing I44 /W
repeatedly. To select the symbol, press
DW repeatedly after flashing ")."
2
Press W.
8 Repeat Steps 6 and 7 until you have
entered the entire title.
If you enter an incorrect character, press
44 or W until the incorrect character
starts flashing.
Press CLEAR to erase the incorrect
character, then enter the correct one.
9 Press YES.
"Complete !" appears in the display for a
few seconds and the track or disc is labeled.
Finalize the disc before you remove the disc
or turn off the unit. Otherwise, the titles will
be cleared.
Changing
an existing
title
1
Do Steps 1 to 6 in "Labeling Tracks/
Discs" (page 26) to select the title you
want to change.
2 Press and hold CLEAR until the current
title is erased.
3 Do Steps 6 to 6 of "Labeling Tracks/
Discs" (page 26) to enter the new title.
4
Press YES.
"Complete !" appears in the display for a
few seconds and the track or disc is labeled.
To cancel
labeling
Press MENU/NO or W.
27
Advertisement
