Marantz SR5009 Owner's Manual page 239

Contents Connections Playback Settings Tips Appendix
z1 This item can be selected when a Dolby TrueHD signal is played.
z2 This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played.
z3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z4 This setting is available when the set sound mode name contains "+PLgz".
z5 During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z6 This setting is available when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 187)
z7 This item cannot be set when "Dynamic EQ" is set to "On". (v p. 151)
z8 This item cannot be set when Audyssey ® Setup (Speaker Calibration) has not been performed.
z9 This item cannot be set when "MultEQ XT" is set to "Off". (v p. 150)
®
z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z11 In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
Front panel Display Rear panel 239 Remote Index