Maintenance Schedule - HUSTLER Lawn Mower Accessory Owner's Manual

Hustler turf equipment lawn mower accessory user manual
Table of Contents

Advertisement

FasTrak 36/42
Mini FasTrak 36/42

Maintenance Schedule

Refer to Fig. 4-12
SERVICE AT
INTERVALS INDICATED
Verify safety start interlock system
Visually inspect unit for loose
hardware and/or damaged parts
Visually inspect tires
Check oil level, engine (1)
Clean air intake screen (4)
Clean foam element (4)
Check fuel level
Blades - sharpen & securely fastened
Discharge chute - securely in place &
in lowest position
Clean engine and transaxle
compartment
Grease deck height pivots
Grease gauge wheel bearings
Change engine oil and filter (1) (3)
Clean cylinder and head fins(a)
Check battery connections
Check tire pressure with a gauge
Clean engine exterior (a)
Replace air cleaner paper element (4)
Clean & regap spark plugs (a)
Check pump and deck belt tension
and condition (5)
Check fuel and hydraulic lines (6)
Check fuel valve and grommet (6)
Tighten lug nuts on wheels (2)
Change fuel filter
Replace spark plugs
NOTES:
1. Initial oil change is after 5 hours of operation. Thereafter, change oil after
every 40 hours operation. Change more often under dusty or dirty condi-
tions and during hot weather periods.
2. Torque initially and after first 2 hours of operation.
3. Change engine oil filter per the engine manufacturer's recommendations.
Refer to Engine Owner's Manual for recommendations and other mainte-
nance items.
4. Service more often under dusty or dirty conditions.
5. Pump drive belt only - Inspect every 6 months or 100 hours and replace
if worn or cracking is noticed. Otherwise, replace every 200 hours or 2
years whichever comes first.
6. Check fuel line hoses, fuel valve and grommets for any cracks or leaks
REFERENCES:
a — Refer to Engine Owner's Manual
NOTE: After completing maintenance cycle (100 hours), repeat cycle.
601156_0308
WEEKLY
ANNUALLY
OR 50
OR 100
HOURS
HOURS
Prior to each use
Prior to each use
Prior to each use
Prior to each use or every 4 hours
Prior to each use or every 4 hours
Prior to each use or every 4 hours
Prior to each use
Prior to each use
Prior to each use
Daily
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
FasTrak 48/54

Maintenance Schedule

Refer to Fig. 4-13
SERVICE AT
INTERVALS INDICATED
Verify safety start interlock system
Visually inspect unit for loose
hardware and/or damaged parts
Visually inspect tires
Check oil level, engine (1)
Clean air intake screen (4)
Clean foam element (4)
Check fuel level
Blades - sharpen & securely fastened
Discharge chute - securely in place &
in lowest position
Clean engine and transaxle
compartment
Change transaxle oil and filter (7)
Grease deck height pivots
Grease gauge wheel bearings
Change engine oil and filter (1) (3)
Clean cylinder and head fins(a)
Check battery connections
Check tire pressure with a gauge
Check hydraulic oil level
Clean engine exterior (a)
Clean & regap spark plugs (a)
Check pump and deck belt tension
and condition (5)
Check fuel and hydraulic lines (6)
Check fuel valve and grommet (6)
Tighten lug nuts on wheels (2)
Change fuel filter
Replace spark plugs
NOTES:
1. Initial oil change is after 5 hours of operation. Thereafter, change oil after
every 40 hours operation. Change more often under dusty or dirty condi-
tions and during hot weather periods.
2. Torque initially and after first 2 hours of operation.
3. Change engine oil filter per the engine manufacturer's recommendations.
Refer to Engine Owner's Manual for recommendations and other mainte-
nance items.
4. Service more often under dusty or dirty conditions.
5. Pump drive belt only - Inspect every 6 months or 100 hours and replace
if worn or cracking is noticed. Otherwise, replace every 200 hours or 2
years whichever comes first.
6. Check fuel line hoses, fuel valve and grommets for any cracks or leaks
7. Initial system oil and filter change must be after the first 75 hours of use or
1 year whichever comes first. Thereafter, replace filter and oil in each
transaxle every 2 years or 200 hours, whichever comes first.
REFERENCES:
a — Refer to Engine Owner's Manual
NOTE: After completing maintenance cycle (300 hours), repeat cycle.
24
WEEKLY
MONTHLY
OR 50
OR 100
HOURS
HOURS
Prior to each use
Prior to each use
Prior to each use
Prior to each use or every 4 hours
Prior to each use or every 4 hours
Prior to each use or every 4 hours
Prior to each use
Prior to each use
Prior to each use
Daily
Every 200 hours or 2 years
X
X
X
X
X
X
X
X
X
X
X
X
X
ANNUALLY
OR 300
HOURS
X
X

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

FastrakMini fastrak

Table of Contents