Sleep Mode; Hibernate Mode - Develop ineo 4000P User Manual

Mode Description
Hibernate The product is in a low-level energy-saving mode.
Off The product is plugged into an electrical outlet, but the power switch
is turned off.
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy
by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically
engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout.
Factory default Sleep Mode Timeout for this product (in minutes):
By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120
minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase
the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast
response, but uses more energy.

Hibernate Mode

This product is designed with an ultra-low power operating mode called Hibernate mode. When operating
in Hibernate Mode, all other systems and devices are powered down safely.
The Hibernate mode can be entered in any of the following methods:
• Using the Hibernate Timeout
• Using the Schedule Power modes
• Using the Sleep/Hibernate button
Factory default Hibernate Timeout for this product in all countries or regions except for EU countries and
Switzerland
Factory default value for this product in EU countries or regions and Switzerland
The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified
between one hour and one month.
User's Guide
30 min.
- 215 -
Power consumption (Watts)
0.5 W
0.0 W
Disabled
3 days