Use
Mac Binary PS
On
Off
Auto
ENA Address
yyy.yyy.yyy.yyy
ENA Netmask
yyy.yyy.yyy.yyy
ENA Gateway
yyy.yyy.yyy.yyy
SMTP Setup menu
Use
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Reply Address
User's Guide
To
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
Auto is the factory default setting.
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Set the network address information for an external print server.
Note: This menu is available only when the printer is attached to an external
print server through the USB port.
Set the netmask information for an external print server.
Note: This menu is available only when the printer is attached to an external
print server through the USB port.
Set the gateway information for an external print server.
Note: This menu is available only when the printer is attached to an external
print server through the USB port.
To
Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Specify the amount of time in seconds before the server stops trying
to send an e-mail.
Note: 30 seconds is the factory default setting.
Specify a reply address of up to 128 characters in the e-mail sent by
the printer.
- 101 -