On-Screen Messages - Canon PowerShot SX700 HS User Manual

Cannot send images.
• The destination device has insufficient storage space. Increase the storage space on
the destination device and resend the images.
•
The write-protect tab of the memory card in the destination camera is set to the
locked position. Slide the write-protect tab to the unlocked position.
•
Images are not sent to CANON iMAGE GATEWAY or other Web services if you move
or rename image files or folders on the computer that received images sent using
Image Sync via an access point (= 139). Before moving or renaming these image
files or folders on the computer, make sure the images have already been sent to
CANON iMAGE GATEWAY or other Web services.
Cannot resize images for sending.
•
Images cannot be resized to be bigger than the resolution setting of their original size.
•
Movies cannot be resized.
Images take a long time to send./The wireless connection is disrupted.
•
Multiple images may take a long time to send. Try resizing the image to [
to reduce sending time (= 134).
•
Movies may take a long time to send.
•
Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note
that images may take a long time to send even when [
•
Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
•
Reset the Wi-Fi settings (= 144).
If an error message is displayed, respond as follows.
No memory card
•
The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way
Memory card locked
•
The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position
Cannot record!
•
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way
Memory card error (=
•
] or [ ]
If the same error message is displayed even after you have formatted a supported
memory card
a Canon Customer Support Help Desk.
Insufficient space on card
•
There is not enough free space on the memory card to shoot
] is displayed.
84) or edit images
insert a memory card with enough free space
Charge the battery (=
No Image.
•
The memory card does not contain any images that can be displayed.
Protected! (=
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4
•
Unsupported or corrupt images cannot be displayed.
•
It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.

On-Screen Messages

(= 14, 13).
(=
(= 14).
150)
(= 2) and have inserted it facing the correct way
(= 106 – 110). Either erase unneeded images
12)
98)
14).
(= 14), contact
(= 28, 52, 68,
(= 101) or
(= 13).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
175