Registering Image Sync To The - Canon PowerShot SX700 HS User Manual

3
Establish the connection.
z z
Connect to the smartphone as described
in steps 5 – 9 in "Connecting to WPS-
Compatible Access Points"
– 127) or steps 4 – 6 in "Connecting
without an Access Point"
z z
After a connection is established with the
smartphone, the smartphone nickname
is displayed on the camera. (This screen
will close in about one minute.)
z z
You can now use the smartphone to
import images from the camera. (The
camera cannot be used to send images
to the smartphone.)
z z
Use the smartphone to end the
connection; the camera will automatically
turn off.
z z
From now on, you can simply press the
< > button to connect to the registered
smartphone.
•
When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 2. To change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 5 – 9 in "Connecting to WPS-
Compatible Access Points" (= 125
•
All images in the camera can be viewed from the connected
smartphone. Note that if you have assigned the <
Settings] (= 143) is not available.
•
One smartphone can be registered to the <
to register a different smartphone, clear the one currently registered
139) first.
(=
(= 125
(= 130).
– 127).
> button, [View
> button. If you wish
Registering Image Sync to the <
By registering Image Sync to the <
< > button to send any unsent images on the memory card to a computer
via CANON iMAGE GATEWAY. For details on Image Sync, see "Sending
Images Automatically (Image Sync)"
1
Prepare the camera.
z z
Register [
– 119).
z z
Install the software on the destination
computer, and configure the camera
settings
2
Press the < > button.
3
Choose the destination.
z z
Press the <q><r> buttons or turn the
<5> dial to choose [
the <m> button.
z z
The camera will automatically reconnect
to any previous access points and send
the images.
z z
From now on, you can simply press the
<
> Button
> button, you can simply press the
(= 139).
] as the destination (= 117
(= 121).
], and then press
(= 139)
> button to send images.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
138