Connecting To Another Camera; Previous Access Points - Canon PowerShot SX700 HS User Manual

Previous Access Points

You can reconnect to any previous access points automatically by following
step 3 in "Connecting without an Access Point"
•
To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
•
When reconnecting via a previous access point, connect the target
device to the access point in step 4.
•
To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in "Connecting to WPS-Compatible Access Points" from step
5 (= 125).
(= 129).

Connecting to Another Camera

Connect two cameras via Wi-Fi and send images between them as follows.
• Only Canon-brand cameras equipped with a Wi-Fi function can be connected
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot
be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this camera.
1
Access the Wi-Fi menu
(=
2
Choose camera.
z z
Press the <o><p><q><r> buttons or
turn the <5> dial to choose [4], and
then press the <m> button.
3
Choose [Add a Device].
z z
Press the <o><p> buttons or turn the
<5> dial to choose [Add a Device], and
then press the <m> button.
z z
Follow steps 1 – 3 on the target camera
too.
z z
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
123).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
132