Konica Minolta magicolor 2550 User Manual page 165

3
Remove the rear panel.
Since there are two
hooks on the right side of
the panel, remove the
rear panel by slightly pull-
ing the left side of the
panel toward you, then
sliding the panel off to the
left.
4
Attach the mounting pin on the
printer controller board.
Be sure to slide the tab
on the hard disk mount-
ing pin to the left during
installation.
5
Remove the plastic strip
between the battery and the disk
controller board. Attach the
spacer to the disk controller
board.
Hard Disk
151