Panasonic Lumix DMC-ZR3 Operating Instructions Manual page 188

Acquiring of still pictures and [MOTION JPEG] motion pictures
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Set the mode dial to anything except [¨].
USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
Align the marks, and insert.
•
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional). If the remaining battery power becomes low while the camera and the PC are
communicating, the alarm beeps.
"
Refer to Disconnecting the USB connection cable safely
USB connection cable. Otherwise, data may be destroyed.
Connect the camera to a PC via the USB connection cable
(supplied).
•
Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
Connecting to other equipment
(other than [AVCHD Lite] motion pictures)
- 154 -
"
(P155) before disconnecting he