Panasonic Lumix DMC-ZR3 Operating Instructions Manual page 113

Note
•
The screen will change as following when the motion picture button is pressed in steps
4
.
Still picture recording
_1
screen
Motion picture mode
_2
setting
Motion picture
recording screen
Still picture mode
setting
_1 Press [DISPLAY] to display the available recording time before recording motion pictures.
_2 The screen that is displayed during Motion Picture Mode setting is different depending on the
[REC MODE]
setting of the
•
Refer to P112 for the [MOTION PICTURE] Mode menu.
•
The flash setting is fixed to [Œ].
•
Refer to P184 for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
•
The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
•
The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
•
When operating the zoom in recording motion pictures, it may take time to come into focus.
• If the Extended Optical Zoom was used before pressing the motion picture button, recordable
area will be changed drastically since these set ings are canceled.
•
When the aspect ratio setting is different in still and motion pictures, the angle of view changes
at the start of mo ion picture recording. When [
view during motion picture recording is displayed.
•
[STABILIZER] is fixed to [MODE1] in recording motion pictures.
•
In recording motion pictures, the following functions cannot be used.
–
[ ], [ ], [ƒ] and [Ù] in [AF MODE]
–
Direction Detection function
–
Extended Optical Zoom
– [FACE RECOG.]
•
It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
•
If while recording motion pictures using the AC adaptor (optional) the power supply is cut off
due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture being
recorded will not be recorded.
•
Zoom speed may be slower than normal.
Advanced (Recording pictures)
.
REC AREA]
- 79 -
(P26) is set to [ON], angle of
3
and
R1m21s
3