Panasonic Lumix DMC-ZR3 Operating Instructions Manual page 184

Note
•
Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while
when the operation icons are displayed. Operation icons are displayed when one of the
following buttons is pressed while the operation icons are not displayed.
///, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button
–
•
It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2
or more HDMI input terminals on the TV.
• When the [VIERA Link]
will be limited.
•
VIERA Link must be activated on the connected TV. (Read the operating instruc ions of the TV
for how to set etc.)
•
If you are not using VIERA Link, set
w Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also
turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.)
Automatic input switching:
•
If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel
on the TV automatically switches to this unit's screen. If the TV's power is in standby status, it
will turn on automatically (if [Set] has been selected for the TV's [Power on link] setting).
•
Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel. (For details on how to
switch input, please read the operating instructions for he TV.)
•
If VIERA Link does not work properly, refer to page 181.
Note
•
If you are unsure whether or not the TV you are using is compatible with VIERA Link, read he
opera ing instructions for the TV.
•
Available linked operations between this unit and a Panasonic TV is different depending on the
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating
instructions of the TV for the operations that support the TV.
•
Operation is not possible with a cable hat is not based on the HDMI standard.
Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•
VIERA Link will not work even if you connect the HDMI mini cable while the unit is connected to
the PC or the printer.
•
[HDMI MODE] (P29)
•
The resolution may switch automatically when an [AVCHD Lite] motion picture that was
recorded with another camera is played back on this unit. The screen may turn black for a while
when that occurs, but it is not a malfunction.
Connecting to other equipment
(P29) of this unit is set to [ON], operation using the button on this unit
[VIERA Link]
for this unit is determined automatically when the VIERA Link is operating.
- 150 -
(P29) to [OFF].