Operation; Charging Before Initial Use; Standard Recharging Of The Psx - PowerStation PSX Owner's Manual

OPERATION

Read all operating instructions before using your PSX.
CAUTION
This section will guide you through:
• Charging the PSX before initial use

• Standard recharging of the PSX

• Jumpstarting a vehicle
• Using the integrated work light
• Using the compressor
• Operating 12V DC outlet
Charging the PSX before initial use
We recommend charging the PSX on a regular basis. The initial charge could
take up to 72 hours.
Note: If the battery is fully discharged, up to 72 hours may be needed to completely
recharge. If you store your PSX for extended periods of time without use, completely
recharge at least once every month. The PSX is equipped with a sensor that prevents
overcharging.
Do not use the PSX as a power source while recharging.
CAUTION
Use the following step-by step guide to recharging your unit.
Standard Recharging of the PSX
We recommend charging the PSX on a regular basis. Even when not in regular
use, the PSX should be charged at least once per month to maintain optimum
performance.
Charge your PSX after each use.
To recharge the PowerStation internal battery using AC power:
1. Ensure that all elements of the unit are off and that nothing is
connected to the 12V DC outlet.
2. Plug the AC charger cable into the AC charger access point on the unit.
At this time the red "Battery Charging" indicator will illuminate.
3. Plug the AC charger cable into a standard wall AC outlet.
4. Allow unit to charge until the red "Battery Charging" indicator turns off
and the green "Full Charge" indicator is illuminated.
5. The charge level can be checked by first disconnecting the AC charger
cable from the wall outlet and pressing the battery test button.
082508
PSX Owners Manual Page 8