Disarming The Vrs - Viper 3105V Owner's Manual

Disarming the VRS

Take the time to familiarize yourself with the VRS trig ger ing se quence
and the disarm pro ce dure. It is important to recognize and identify the
VRS trigger sequence and know how to disarm it in case of ac ci den-
tal activation.
Once the VRS is armed, it does not disarm au to mat i cal ly. You must
disarm it the next time you operate the vehicle. You must dis arm it with
one of the fol low ing pro ce dures:
If the system has not entered the triggered sequence (siren has not
started chirping):
1. Turn the ignition on.
2. Press
and the siren chips. If the system has entered the triggered se-
quence (siren has begun chirping), pressing the disarm button of
the trans mit ter will not disarm VRS.
To disarm the VRS during a VRS trigger sequence:
3. Turn the ignition on.
4. Press the Valet button the pre-programmed number of times to
disarm the VRS system.
If the VRS has begun its chirping sequence, the ignition must be
turned off, then On, to disarm. If you are driving the vehicle, pull
over to a safe place and follow the triggered sequence disarm
procedure.
Note: The unit responds to 1 to 5 valet button presses to disarm
the VRS (factory setting is 1 press). Check with your installer to
determine the setting you want.
© 2012 Directed. All rights reserved.
on the remote control for 1 second. The lights flash
21