Base Unit Dimensions - Carrier 42C Series Product Data

Base unit dimensions (cont)
42DF EXPOSED CEILING UNIT WITH DISCHARGE AND RETURN GRILLE AND ELECTRIC HEAT
NOM
UNIT
AIRFLOW
SIZE
A
(Cfm)
06 600 31
08 800 36
10 1000 40
12 1200 45
14 1400 50
16 1600 55
18 1800 60
20 2000 64
*Unit weights are based on dry coils and minimum rows. Weights exclude packaging,
valves, and other components.
NOTES:
1. Right hand unit shown; left hand unit opposite.
2. Coil stub-out connection data available on request.
3. Units fabricated of galvanized steel with an Arctic White baked finish.
4. Internal parts fabricated of galvanized steel.
5. Sizes 06, 08 and 10 have one motor, one blower. Sizes 12 through 20 have 2 motors,
2 blowers.
6. Units must have drain line pitched and trapped externally.
7. Stamped supply and return grilles are not available.
8. Bottom return air is not available.
9. See 42DA-203-1 for optional coil connections.
10. Fan switch and wall plate are not shown.
11. Dimensions are in inches (mm).
86
1
DIMENSIONS (in. ± / )
8
B C D E Blower
1 1
13 / 14 26 8 /
2 2
1
18 / 20 31 8
2
22 1 / 24 35 8
2
27 1 / 28 40 8 1 /
2 2
32 1 / 34 45 8
2
37 1 / 38 50 8 1 /
2 2
1
42 / 44 55 8
2
1
46 / 48 59 8
2
QTY/UNIT UNIT
WEIGHT*
1 — Junction Box
Motor
(lb)
2 — Return Air Grille, Hinged, Bar Type, with Fil-
1 1 150
3 — Unit Mounting Channel (2), 14-gage; 4
1 1 160
1 1 170
4 — Auxiliary Drip Lip
2 2 195
5 — Electric Strip Heater Element (optional)
2 2 205 6 — Coil Inlet (See table on page 87), Copper
2 2 215
7 — Coil Outlet (See table on page 87), Copper
2 2 230
2 2 235
8 — Manual Air Vent
9 — Filter, Throwaway
10 — Bottom Access Panel
11 — Drain,
12 — Drain Pan Insulated with Styrofoam
13 — Side Access Panel (2)
14 — Discharge Air Grille (Double Deflection)
A42-4124
LEGEND
ter Frame (Anodized Aluminum Only)
Mounting Slots, 1 / in. x 2-in.
2
Sweat Connection
Sweat Connection
7
/ -in. OD
8