Accessory Dimensions - Carrier 50JZ Product Data

Accessory dimensions

HVAC unit
base
Screw
(NOTE A)
*Gasketing
outer flange
Flashing field
supplied
Roofing material
field supplied
Cant strip
field supplied
*Provided with roofcurb
Roof Curb for Small Cabinet
Note A: When unit mounting screw is used,
retainer bracket must also be used.
44 5 / "
16
Return opening
(B X C)
ROOF CURB
Notes:
1. Roof curb must be set up for unit being installed.
2. Seal strip must be applied, as required, to unit being installed.
3. Dimensions in [ ] are in millimeters.
4. Roof curb is made of 16-gage steel.
5. Table lists only the dimensions, per part number, that have changed.
6. Attach ductwork to curb (flanges of duct rest on curb).
7. Insulated panels: 1-in. thick fiberglass 1 lb. density.
8. Dimensions are in inches.
9. When unit mounting screw is used (Note A), a retainer bracket must be used as
well. This bracket must also be used when required by code for hurricane or
seismic conditions. This bracket is available through Micrometl.
Gasketing
inner flange*
Wood nailer*
Roofcurb*
Insulation (field
supplied)
Duct work
field supplied
Roof
Supply opening
(B x C)
B Typ.
D
C Typ.
A
Short
Support
Insulated
deck pan
Long
Support
Roof Curb Dimensions
Side View
UNIT SIZE ODS ORDER NO.
CPRFCURB006A00
024-036
CPRFCURB007A00
CPRFCURB008A00
042-060
CPRFCURB009A00
HVAC unit
base
Gasketing
inner flange*
Screw
(NOTE A)
*Gasketing
outer flange
Flashing field
supplied
Roofing material
field supplied
Cant strip
field supplied
*Provided with roofcurb
Roof Curb for Large Cabinet
Note A: When unit mounting screw is used,
retainer bracket must also be used.
R/A
Gasket around
duct
Insulated
Gasket around
deck pan
outer edge
A B
in. [mm] in. [mm]
8 [203] 11 [279]
14 [356] 11 [279]
8 [203] 16-3/16 [411]
14 [356] 16-3/16 [411]
Wood nailer*
Roofcurb*
Insulation (field
supplied)
Duct work
field supplied
Roof
S/A
C D
in. [mm] in. [mm]
16-1/2 [419] 28-3/4 [730]
16-1/2 [419] 28-3/4 [730]
17-3/8 [441] 40-1/4 [1022]
17-3/8 [441] 40-1/4 [1022]
9