Table of Contents
Advertisement
installation & connection
connectInG WItH otHer DeVIce
connecting to the monitor
Connect the video out port of the camera to the video input port of the monitor.
`
To check the display screen after installing the camera for the first time, you can use the C-Video
M
port to check the video screen.
`
You can set the video output type to either NTSC or PAL. (page31)
`
The C-Video source (4:3) will be displayed with either side truncated in comparison with the
HD-SDI video.
`
The video source from the HD-SDI port can be displayed on the dedicated monitor. To display the
source on a commercial monitor, you need a converter to convert the video signal as appropriate.
16_ installation & connection
Test monitor for installation
or
RS-485
Converter
PC
Motion detection output device
Day/Night mode controller
DVR
System Controller
Advertisement
Table of Contents
