Configuration; Configuration Pages - Cradlepoint MBR1400 Product Manual

MBR1400 | USER MANUAL – Firmware version 4.2
CRADLEPOINT

4.4 Configuration Pages

The following table shows the navigation layout of the administration pages. Click on the tabs along the top bar to reveal
the following dropdown menus.
Getting Started
First Time Setup
IP Passthrough Setup
WiFi Protected Setup
Status – Displays various types of information about your router such as a list of clients that are attached to your
networks (Client List), the details of each Internet source your router is using (Internet Connections), and a map of
your router's location (GPS). Very few changes can be made from this tab because the primary purpose is to display
information.
Network Settings – Provides configuration options for the networks, or LAN, created by your router. For example, you
can enable a guest WiFi network (WiFi / Local Networks), set up rules to filter websites (Content Filtering), or create
a traffic-shaping rule to set bandwidth priorities (WiPipe QoS).
© 2013 CRADLEPOINT, INC.
Status Network Settings
Client List Content Filtering
Dashboard DHCP Server
GPS DNS
GRE Tunnels Firewall
Hotspot Clients MAC Filter / Logging
Internet Connections Routing
Routing Routing Protocols
Statistics WiFi / Local Networks
System Logs WiPipe QoS
VPN Tunnels
WiPipe QoS
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
Internet
Connection Manager
Client Data Usage
Data Usage
GRE Tunnels
NHRP Interfaces
VPN Tunnels
WiFi as WAN / Bridge
WAN Affinity / Load
Balancing
FOR MORE HELP AND RESOURCES
System Settings
Administration
Device Alerts
Hotspot Services
Managed Services
Serial Redirector
System Control
System Software
PAGE 33