Chapter 3: Recording Sequences
Selecting a Track
Sq:01-Sequence01
.......................................................
™:120.0(MAS)
Count:OFF
..................................................................................................
Tr:01-Track-01
S:MIDI :10A-Device10
S:MIDI :10A-Device10
STEP
Move the cursor to the Tr: field and select the track by rotating the DATA wheel. The name and
number of each track will appear.
Renaming a Track
To open the Track window, select the Tr: field and press the OPEN WINDOW key.
•
Track name:
This changes the name of the track.
The name window will be displayed by turning the DATA wheel or tapping a pad.
Press ENTER to save the name.
Note: If you do not press the ENTER key and move the Default field or other pages with
the CURSOR DOWN key, the entered name will be ignored and the name will not be
changed.
•
Default:
You can use this as the default name for each track (instead of Track). Enter the name in the
same way as the Track name.
Timing:1/16
Loop: ON
Loop: ON
EDIT
TrMUTE
......................................................................................................
Track
Track name:Track-01
Track name:
....................................................................................
Default:Track-01
DELETE
........................................................................................................
Page 47
Now:001.01.00
Tsig: 4/ 4
Tsig: 4/ 4
Bars: 0
Bars: 0
ON:YES
Pgm:OFF
Velo%:100
SOLO
Tr -
Tr +
CLOSE
COPY