Name Window; Deleting A Sequence - Akai MPC2000XL Operator's Manual

Chapter 3: Recording Sequences

Name window

Tap a drum pad or rotate the DATA wheel at the name field to display the Name window.
The Name window is common to all naming fields.
Sq:01-(Sequence01)
.......................................................
™:120.0(MAS)
Count:OFF
..................................................................................................
Tr:01-(Unused)
S:DRUM1:OFF
STEP
........................................................................................................
Enter letters with the DATA wheel and move to the left/right with the CURSOR LEFT or
RIGHT keys.
You can directly enter letters from the drum pads. The letter shown on the top right of the
pad will be entered when the pad is pressed. For example, A will be entered if you press
PAD 1 once and B if you press it again.
Press 16 LEVELS to enter a space.
To switch between lower and upper case letters, press FULL LEVEL.
COPY [F2] copies the name to the clipboard and PASTE [F3] pastes the name from the
clipboard.
Enter the name and press the ENTER [F5] key to confirm.

Deleting a Sequence

To open the Sequence window select the Sq: field and press OPEN WINDOW.
Press DELETE [F2].
Sq:01-(Sequence01)
.......................................................
™:120.0(MAS)
Count:OFF
..................................................................................................
Tr:01-(Unused)
S:DRUM1:OFF
STEP
The selected sequence data will be erased if you press DO IT[F5] and the sequence name will
change to (Unused).
The following warning will appear if you press ALL SQ [F3] and all of the sequence data will be
erased when you press DO IT [F5].
Sq:01-(Sequence01)
.......................................................
™:120.0(MAS)
Count:OFF
..................................................................................................
Tr:01-(Unused)
S:DRUM1:OFF
STEP
...................................................................................................
Name
Timing:1/16
New name:Íequence01
Loop: ON Loop: ON
Press PADs or use DATA knob. Press PADs or use DATA knob.
EDIT TrMUTE
COPY PASTE
......................................................................................................
Sequence
....................................................................................
Delete Sequence Delete Sequence
Timing:1/16
Sequence name: Sequence name:Sequence01
....................................................................................
Sq:01-Sequence01
Loop: ON Loop: ON
Default name:Sequence01 Default name:Sequence01
Pressing DO IT will erase Pressing DO IT will erase
this sequence!! this sequence!!
EDIT TrMUTE
DELETE ALL SQ
........................................................................................................ ........................................................................................
......................................................................................................
Sequence
.................................................................................... Delete ALL Sequences Delete ALL Sequences
Timing:1/16
Sequence name:Sequence01 Sequence name:
....................................................................................
Pressing DO IT Will erase Pressing DO IT Will erase
Loop: ON Loop: ON
Default name:Sequence01 Default name:Sequence01
ALL sequences!! ALL sequences!!
EDIT TrMUTE
DELETE
........................................................................................................ ........................................................................................
Page 33
Now:001.01.00
Tsig: 4/ 4 Tsig: 4/ 4
Bars: 0 Bars: 0
ON:YES Pgm:OFF
Velo%:100
SOLO Tr - Tr +
CANCEL ENTER
Now:001.01.00
Tsig: 4/ 4 Tsig: 4/ 4
Bars: 0 Bars: 0
ON:YES Pgm:OFF
Velo%:100
SOLO Tr - Tr +
CANCEL CLOSE DO IT COPY
Now:001.01.00
Tsig: 4/ 4 Tsig: 4/ 4
Bars: 0 Bars: 0
ON:YES Pgm:OFF
Velo%:100
SOLO Tr - Tr +
CANCEL CLOSE DO IT COPY