Check The Print Quality - Brother MFC-J425W Quick Setup Manual

5

Check the print quality

a
When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Color Start.
b
Check the quality of the four color blocks on the
sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes) to
finish the quality check and go to step 6.
If you can see missing short lines, press 2 (No)
and follow the steps on the LCD.
6
Wireless setup
(if needed)
For wireless setup using a Macintosh computer or
mobile device, go to a.
For Windows users (all connections) and Macintosh
USB connections, go to b.
a
If you are using a Macintosh computer or a
mobile device on a wireless network, press
OK.
Press a or b to choose Yes.
Press OK.
Then go to step 18 on page 19 to continue the
wireless setup.
After finishing the wireless setup you will need
to return to step 7 to finish the machine setup.
OK
Poor
Note
If you want to change the language on your
machine first, you can choose No and you will be
able to configure the wireless settings later.
b
If you are using a Windows
to connect your Macintosh using USB, press
OK.
Press a or b to choose No.
Press OK.
Then go to step 7.
The wireless setup for Windows
covered in later steps.
7
Choose your language
(if needed)
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
®
computer or want
®
users will be
7