Technical Data; Extending The Hydraulic Hoses - Husqvarna K 3600 MKII Operator's Manual

Technical data

Blade diameter, mm/inches
Cutting depth, mm/inches
Max. peripheral speed, m/s / r/min
Max.motor speed, r/min
Hydraulic motor
Max. hydraulic pressure, bar/ (psi)
Oil flow, min-max, l/min
Height, mm/inches
Length, mm/inches
Width, mm/inches
Weight, excl. blade, kg
Weight ring blade, kg
Specifications hydraulic oil*
Oil temperature (operational), °C
Water consumption, l/min
Hydraulic couplings
*We recommend the use of environmentally approved hydraulic oil.
**With high ambient temperatures use oil with a higher viscosity.
Noise emissions (see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Vibration levels (see note 3)
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 792-7/A1. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 792-7/A1. Reported data for vibration level has a typical statistical dispersion (standard
2
deviation) of 1 m/s .

Extending the hydraulic hoses

When extending the hydraulic hoses, the inside diameter of the hose must be increased according to the table to counteract power
loss.
Extension, m
Up to 30 m
30-45
45-100
20 –
English
TECHNICAL DATA
K3600 MKII
350/14"
260/10"
55/3000
17000
Geared motor (open centre valve)
150 / 2200
35-42
410
715
260
8,3
0,8
150 VG 32 (10W)**
60
4
1/2' FF according to HTMA regulations. (thread 3/8')
110
dB(A) 111
WA
99
4,3
6,0
Inside diameter of the hydraulic hose, inches
1/2
5/8
3/4
) in conformity with EC directive 2000/14/EC.
WA