System Settings - D-Link AirPremier DWL-00AP Manual

Using the AP Manager (continued)
Firmware
You can upgrade the firmware by clicking on
this button after selecting the device(s).
To upgrade the firmware:
• Download the latest firmware upgrade from http://support.dlink.com to an easy
to find location on your hard drive.
• Click on the firmware button as shown above.
• A popup window will appear. Locate the firmware upgrade file and click Open.
IMPORTANT! DO NOT DISCONNECT POWER FROM THE UNIT WHILE THE
FIRMWARE IS BEING UPGRADED.

System Settings

You can customize the basic System Settings for
the DWL-00AP by clicking on this button.
• Access Password: This sets the admin password for
the selected device(s).
• Auto Refresh: This setting allows you to enable auto
refreshing of the network device list. By default this option
is disabled. If you choose to enable it, you must enter the
refresh interval in seconds.
All other settings on this screen should
be left at the default setting.
56