D-Link AirPremier DWL-00AP Manual page 32

Using the Configuration Menu (continued)
Tools > Admin
User Name-
Limit Admin-
istrator IP-
User Name-
Old Password-
New Password-
Confirm New
Password-
Console
Protocol-
Time Out-
Community
String-
Enter a user name; admin is the default setting.
Enable the Limit Administrator IP, you can set one or two
IP address which allowed to manage this AP.
Enter a user name; admin is the default setting.
To change your password, enter your old password here
Enter your new password here.
Enter your new password again.
Choose None, Telnet or SSH.
Select a time period after which a session timeout will occur.
Enter the Public/Private Community string as the password to
access the SNMP service.
3