JBL SP5 Owner's Manual page 7

E X I S T I N G C O N S T R U C T I O N
SP6C
Remove the grille from
the speaker frame.
Connect the speaker wires
to the speaker.
Replace the metal grille.
6
≥1/2"
≥1/2"
≥1/2"
Determine the correct speaker
location. Note: Always allow at
least one-half inch between a
wall stud and the speaker cutout
or the locking tabs will not be
able to swivel into place.
Place the frame assembly
in the wall.
Cut the drywall.
Screw down each of the three
Phillips head screws. The locking
tabs will swivel into place and
secure the unit to the rear surface
of the drywall.