Searching By Alphabetical Order; Alphabet Search; Searching A Track By Listening To Track Passages - Zappintm; In The Case Of ''Sensme™ Channels" Playback - Sony DSX-S300BTX Operating Instructions Manual

Searching a track by listening
to track passages - ZAPPINTM
2
Press the multi way encoder or
(ZAP/SHUF)
when a track you want to
listen is played back.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.
While playing back short track passages in a
USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
1
Press
(ZAP/SHUF)
during playback.
After "ZAPPIN" appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.
Track
•
y
¥
y
The part of each track to
playback in ZAPPIN mode.
(ZAP/SHUF)
pressed.
M
<.
z____
>
I
r:l
.{ C) the
t- .;.
~'A'~
..........
r:l
<.
B____
>
-tl
n
.:"
C____
>
' .
Searching by alphabetical order
- Alphabet search
When an iPod or USB device containing song
information is connected to the unit, you can
search for a desired item by alphabetical order.
While this unit is reading song information,
"0"
appears on the display. You can use the Alphabet
search function when"
0"
disappears. For a
USB device, the maximum number of searchable
files (tracks) is 5,000.
1
Push the multi way encoder right in
Quick-BrowZer mode.
An alphabet list appears.
To cancel Jump mode
Press ~ (BACK) or push the multi way encoder
left. A list of the search categories appears.
3
Press the multi way encoder.
The display returns to the Quick-BrowZer
mode and the selected item appears.
4
Push the multi way encoder up/down
to select the desired item, then press
it.
Playback starts if the selected item is a track.
2
Rotate the multi way encoder to select
the first letter of the desired item, then
press it.
A list of items in the selected category
appears in alphabetical order.
If there is no song beginning with the desired
letter, "Not Found" appears.
3
Push the multi way encoder up/down
to select the desired item, then press
it.
Playback starts if the selected item is a track.
To cancel Alphabet search
Press
~
(BACK) or push the multi way encoder
left. A list of the search categories appears.
Notes
• For a USB device, it may take time to read song
information after connecting to the unit.
While reading song information,
"0"
appears in the
top left of the display.
• Only the song information of the USB device last
connected can be stored.
• If replacing the car battery, changing connections or
resetting the unit, the stored song information will be
erased.
In the case of "SensMe
™
channels" playback
If the track being searched is transferred by
"Content Transfer," the most melodic or
rhythmical sections* of tracks are played. For
details on the SensMe ™ function, see page 22.
*
May not be detected correctly.
Tips
• You can select the playback time from about 6
seconds/15 seconds/3D seconds (page 40). You
cannot select the passage of the track to playback.
• Push the multi way encoder left/right in ZAPPIN
mode to skip a track.
• Push the multi way encoder up/down in ZAPPIN
mode to skip album.
29