Usb Devices; Playing Back A Usb Device; Playing Back Via The Usb (Internal); Connector - Sony DSX-S300BTX Operating Instructions Manual

•
20
USB devices
For details on the compatibility of your USB
device, visit the support site.
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
• MSC (Mass Storage Class) type USB devices
compliant with the USB standard can be used.
• Corresponding codec is MP3 (.mp3), WMA
(.wma), AAC (.m4a) and AAC (.mp4).
• Backup of data in a USB device is
recommended.
Notes
• Connect the USB device after starting the engine.
Depending on the USB device, malfunction or
damage may occur if it is connected before starting
the engine.
• Do not place a cellular phone or a device with
wireless communication functions on the TUNE
TRA
Y,
as it may not receive phone signals or
communication may be terminated.
• Do not leave a USB device in a parked car, as
malfunction may result.
Playing back a USB device
A USB device can be connected to the internal/
external or both USB connectors. To switch
between USB devices, press
(MODE).
Playing back via the USB (internal)
connector
1
Press
(OPEN).
The front panel is flipped down.
2
Press PUSH OPEN on the TUNE TRAY.
The TUNE TRAY opens slowly.
TUNE TRAY
3
Connect the USB device to the USB
connector.
4
Slide in the TUNE TRAY by pressing
PUSH CLOSE on the TUNE TRAY until
it locks shut.
5
Close the front panel.
6
Press
(SOURCE/OFF)
repeatedly until
"USB" appears, and then press
( MODE)
to switch the USB device.
"USB Internal" appears, and playback starts.
If a USB device is already connected, to start
playback, repeat step 6.
Press and hold
(SOURCE/OFF)
for 1 second to
stop playback.
Removing the USB device
1 Stop the USB device playback.
2 Press
(OPEN).
3
Press PUSH OPEN on the TUNE TRAY.
4 Remove the USB device.
S Slide in the TUNE TRAY, and close the front
panel.