Picture quality problems
Status
Picture is not clear
Picture is too dark
Picture is too light
www.kodak.com/go/support
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens
(see page
■
Make sure the camera is not in Macro mode
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Use a larger picture size
■
If you're manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures
■
Reposition the camera for more available light.
■
Use Fill flash
(see page
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
47).
(see page
30).
(see page
8) or change your position so light is not
(see page
8).
Troubleshooting
(see page
32).
31).
page
45.)
(see page
page
45.)
(see page
31).
31).
43