High Ceiling Operation - LG Multi-Inverter Type Service Manual

E.S.P. setting value (reference)
Static pressure(mmAq)
Model name Step(Hi/Mid/Lo)
8.5 CMM(300CFM)
AMNW09GB1A0
7.5 CMM(265CFM)
[LMDN095HV]
6.5 CMM(230CFM)
9.5 CMM(335CFM)
AMNW12GB1A0
8.5 CMM(300CFM)
[LMDN125HV]
7.5 CMM(265CFM)
15 CMM(530CFM)
AMNW18GB2A0
13.5 CMM(477CFM)
[LMDN185HV]
11.5 CMM(406CFM)
[ Notes ]
1. To get the desired Airflow & E.S.P. combination from the table set the matching value from the table. Value other than
that in table will not give the combinations of airflow & E.S.P. which are mentioned in the table.
2. Table data is based at 230V. According to the fluctuation of voltage, air flow rate varies.

4.3 High Ceiling operation

Function to Control the Air Volume by Ceiling Height Control of the air intensity has been made possible by employing a
height-control algorithm for the interior fan.
According to the height of the installation, it provides variability of indoor fan motor rpm. If the height of installation is low
then you can adjust low rpm of indoor fan motor. On the other hand if the height of the installation is high you can adjust
high rpm of indoor fan motor. Selection of speed can be done by slide switch at the back of the LCD wired remote.
Copyright ©2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
0
75
69
62
82
75
69
90
82
75
Installation on the
normal-height ceiling
1 2
Setting value
84 94
77 88
71 83
90 99
84 94
77 88
97 105
90 99
84 93
installation on the
higher ceiling
- 17 -
Part 2 Functions & Controls
3 4
104 114
99 110
95 106
109 118
104 114
99 110
114 122
109 119
103 114
LGE Internal Use Only