Charging The Battery Pack - JVC Everio GZ-EX355 User Manual

Hd memory camera
Hide thumbs Also See for Everio GZ-EX355:
Table of Contents

Advertisement

Charging the Battery Pack

Attach the battery pack.
The battery pack is not
charged at the time of
purchase.
Align the top of the battery
with the mark on this unit,
and slide in until the battery
clicks into place.
To detach the battery pack
(Base)
CAUTION
Be sure to use JVC battery packs.
If you use any other battery packs besides JVC battery packs, safety and
0
performance cannot be guaranteed.
If malfunctions (overcurrent, overvoltage, transmission error, etc) occur, or if any
0
battery manufactured other than JVC is attempted for battery charge, charging
stops. In these cases, the CHARGE lamp blinks quickly for notification.
You can record or play back videos while the AC adapter is connected. (Battery
0
charging cannot be performed during recording or playback.)
Remove the battery when the unit is to be used for a long time. Performance
of the battery may drop if it is left attached to the unit.
Charging time: Approx. 2 h 30 m (using supplied battery pack)
0
The charging time is when the unit is used at 25°C (77°F). If the battery pack is
0
charged outside the room temperature range of 10°C to 35°C (50°F to 95°F),
charging may take a longer time or it may not start. CHARGE lamp blinks 2 times
in a slow cycle for notification if the battery charge does not start. Also, please
note that the recordable and playable time may be shortened under some usage
conditions, such as at low temperature.
Mark
Connect the DC
connector.
Plug in the power.
Charging Lamp
Charging in progress:
Blinks
Charging finished:
Goes out
Cover
AC Adapter
To AC Outlet
(110 V to 240 V)
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everio gz-ex310Enviro gz-ex355Gz-e300 everio

Table of Contents