Direct Monitoring - JVC Everio GZ-EX355 User Manual

DIRECT MONITORING

Setting (Once setting is done, start from the "Regular
o
Operation" below)
Create a QR code.
Enter values in the required items for direct monitoring.
o
Password: set a password to connect this camera to the device by direct
0
monitoring. (8 to 63 characters (64 characters in case of hexadecimal))
Enforced Group Owner: setting used to enable a connection with a device
0
that does not support Wi-Fi Direct. Normally set to "ON".
HTTP Port: Normally set to "80".
0
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap 1 on the lower right of the screen.
(Operation on this camera)
4
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
5
Tap "SET FROM QR CODE".
Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)
6
Tap "EXECUTE".
Read a QR code.
1
Read a QR code.
(Operation on this camera)
2
Tap "YES".
3
Tap "OK".
Tap "NEXT" to return to the screen to read the QR code.
0
Set contents are saved.
0
181