Cateye Strada Digital Wireless CC-RD420DW User Manual page 5

Operating the computer [Measuring screen]
Speed sensor signal icon
It flashes in synch with a speed sensor signal.
Pace arrow
Indicates if the current speed is faster or slower
than the average speed. ( Faster, Slower)
Sensor icon
The speed sensor currently synchronized is dis-
played.
HR sensor signal icon
It flashes in synch with a heart rate sensor signal.
* The position changes according to the heart rate
display position.
Switching computer function
Pressing the MODE button switches the measurement data at the bottom in the order shown in the following figure.
Elapsed Time
0:00'00" – 9:59'59"
MODE
MODE
Clock
0:00 – 23:59
MODE
*1 In combination with the optional speed sensor (ISC-10), it displays the cadence.
*2 When Tm exceeds about 27 hours, or Dst exceeds 999.99 km, .E will appear. Reset the data.
Current speed
0.0 (4.0) – 105.9 km/h
[0.0 (3.0) – 65.9 mph]
* "S" icon is displayed when
displaying current speed at
the bottom.
Speed unit
Option *1
Speed sensor
(ISC-10)
Heart rate Trip Distance
0(30) – 199 bpm 0.00 – 999.99 km
MODE
(Cadence *1) [mile]
Total Distance Maximum Speed
0 – 99999 km[mile] 0.0(4.0) – 105.9 km/h
MODE
[0.0(3.0) – 65.9 mph]
MODE operation when
the computer is mount-
ed on the bracket
Click
Trip Distance-2
0.00 – 999.99 km
MODE
[mile]
MODE
Average Speed (*2)
0.0 – 105.9 km/h
MODE
[0.0 – 65.9 mph]
CC-RD420DW
Starting/Stopping measurement
Measurements start automati-
START
cally when the bicycle is in
motion.
During measurement, km/h or
mph flashes.
Start measurement Stop measurement
Upper display selection
The heart rate ( ) or the cadence ( ) can be switched to the upper dis-
play to monitor it constantly.
Setting method See "Changing the computer settings: Setting the upper
display" (Page 6).
* The optional speed sensor (ISC-10) is required to measure the cadence.
Current Cadence (*)
speed
Heart rate Heart rate/Current speed
Resetting data
Pressing and holding the MODE button on the measure-
ment screen resets any measurement data, except the
total distance (Odo) and trip distance-2 (Dst2).
* The total distance (Odo) is not reset.
• Resetting separately the trip distance-2
Pressing and holding the MODE button with the trip distance-2 (Dst2)
displayed resets only the data of the trip distance-2.
Power-saving function
If the computer has not received a signal for 10 minutes, power-saving
screen will activate and only the clock will be displayed.
With such a screen, pressing the MODE button returns to the measure-
ment screen.
* If another 60 minutes of inactivity elapses in the power-saving screen,
only the speed unit is displayed on the screen.
MODE
10 minutes 60 minutes
Measuring screen Power-saving screen
5
ENG
STOP
Heart
rate
Current speed
(Press
& hold)
MODE
Sleep screen