Sound Adjustment; Clock And Timer - Panasonic SC-HC49DB Operating Instructions Manual

Sound adjustment

The following sound effects can be added to the audio
output.
1
Press [SOUND] repeatedly to select the effect.
2
Press [3, 4] to select the setting and then press
[OK].
"PRESET EQ" "HEAVY" (heavy), "SOFT" (soft),
(Preset Equalizer) "CLEAR" (clear), "VOCAL"
(vocal) or "FLAT" (flat/off).
≥ The factory default is "HEAVY".
Adjust the level (j4 to i4).
"BASS" (Bass) or
"TREBLE" (Treble)
"D.BASS" "ON D.BASS" or "OFF D.BASS".
≥ The factory default is
(Dynamic Bass)
"ON D.BASS".
"SURROUND" "ON SURROUND" or
(Surround) "OFF SURROUND".
≥ The factory default is
"OFF SURROUND".
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.

Clock and Timer

Setting the clock
This is a 24-hour clock.
1
Press [SETUP] repeatedly to select "CLOCK".
2
Press [3, 4] to set the time and then press [OK].
≥ To display the clock, press [SETUP] repeatedly to select
"CLOCK" and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [DISPLAY, iPod MENU] once.)
≥ The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥ Reset the clock regularly to maintain accuracy.
Play timer
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock.
∫ Setting the timer
1
Press [SETUP] repeatedly to select "TIMER ADJ".
2
Press [3, 4] to set the starting time ("ON TIME")
and then press [OK].
3
Press [3, 4] to set the finishing time
("OFF TIME") and then press [OK].
4
Press [3, 4] to select the music source* and then
press [OK].
∫ Turning the timer on
1 Prepare the selected music source and set the
desired volume.
2 Press [SETUP] repeatedly to select "TIMER SET".
Press [3, 4] to select "SET" and then press [OK].
3
≥ "F" is displayed.
≥ To turn the timer off, select "OFF".
4
Press [Í] to turn the unit to standby mode.
≥ To display the timer settings, press [SETUP] repeatedly to
select "TIMER ADJ" and then press [OK] once.
The music source and volume will also be displayed if the
timer is turned on.
≥ During standby, if the timer is turned on, press [DISPLAY,
iPod MENU] twice to display the settings.
≥ This unit can be used as normal after the timer is set,
however:
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
* "CD", "USB", "DAB+" ([SC-HC49DB]), "FM", "AM" ([SC-HC49]
(Australia and New Zealand only)) and "IPOD_DOCK" can
be set as the music source.
≥ For timer music source through the port for iPhone/iPad/
iPod and USB devices, select "USB".
Sleep timer
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] to select "SLEEP".
2
Press [3, 4] to set the time (in minutes) and then
press [OK].
"SLEEP 30" ,. "SLEEP 60" ,. "SLEEP 90" ,. "SLEEP 120"
^------------------.
"OFF" (Cancel)
≥ The remaining time is indicated on the unit's display except
when other operations are performed.
≥ The play timer and sleep timer can be used together. The
sleep timer is always the main timer on the unit.
(------------------J
13
RQT9883