Upgrading Your Firmware - Kodak EasyShare M820 Extended User Manual

Changing settings and more

Upgrading your firmware

Firmware is the software that runs on your frame. To check for the latest version, visit
www.kodak.com/go/digitalframedownloads.
Download the firmware to your computer, then upgrade your frame:
1 On your computer, go to
2 Follow the screen directions to download the frame firmware to your computer.
3 Copy the IMG file to a memory card or USB flash drive, then insert into the frame.
See page 17 for copying files.
4 Tap (Home), then
5 Highlight Firmware Upgrade, then tap OK to begin the upgrade.
IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive
during the upgrade!
When the upgrade is complete, your frame automatically restarts. If it doesn't, press the
power button on the frame to Off, then back to On.
26
www.kodak.com/go/digitalframedownloads.
(Settings).
www.kodak.com/go/support