Upgrading Your Firmware (Recommended) - Kodak PULSE Extended User Manual

FPO

Upgrading your firmware (recommended)

Firmware is the software that runs on your frame. Download and install the latest
version from the Web to keep your frame up to date.
Check your frame's current firmware version
Turn your frame on. Press the Power and the Next buttons at the same time and
■
hold for 5 seconds. Note the firmware version listed on the About screen.
Download the latest firmware
1 On your computer, go to
2 Enter your frame model and note the firmware version that's available for
download. If it's newer than the version on your frame, continue with these
download and upgrade directions.
3 Follow the screen directions to download the frame firmware to your computer.
4 When the firmware is downloaded, copy the IMG file to the root directory (top
level, not in a folder or subfolder) of a memory card or USB flash drive.
www.kodak.com/go/support
2 Touch the screen to display menu options, then
touch the copy button
3 Select the pictures to copy:
■ To copy the currently displayed picture, touch
Current Picture.
To copy all of the pictures on the card or USB
■
device, touch All Pictures.
To exit without deleting, touch Cancel.
NOTE: Copies are automatically resized to a lower resolution
(smaller size). Full resolution is unnecessary for viewing and
quickly fills up the frame's memory.
www.kodak.com/go/digitalframedownloads.
Doing more with your frame
.
15